Simple Steps to Inspect Your Tire Tread Depth
Answer from Dailycarcurator
You can check your tire tread depth using a simple penny test or by looking for built-in wear bars on the tire itself.
The penny test involves inserting a penny into the tire's deepest groove with Lincoln's head facing inward. If you can see the top of Lincoln's head, your tread is likely below the recommended minimum depth of 2/32 of an inch. Alternatively, most tires have small raised bars in the grooves; if the tread is level with these wear bars, it's time for new tires.
Tire condition is just one factor in vehicle safety; regular professional inspections are recommended.
Questions you may want to ask nextChoose one to open a focused answer
What is the minimum recommended tire tread depth?The National Highway Traffic Safety Administration (NHTSA) recommends a minimum tread depth of 2/32 of an inch for safe driving. Anything less can significantly reduce...→How often should I check my tire tread depth?It's a good practice to check your tire tread depth at least once a month and before any long road trips. You should also check them after driving through significant...→Ask a follow-upType your own question to continue this conversation
Related articlesPublished guides selected for this topic
What is the minimum recommended tire tread depthMaintaining adequate tire tread depth is critical for ensuring proper traction, shortening stopping distances on wet roads, and preventing...How to Inspect Tire Tread Depth and Sidewall DamageMaintaining proper tire safety requires regular inspections of your tread depth and sidewalls, helping you catch dangerous wear, cracks, or bulges...What does a steady TPMS warning light mean for my carWhen your vehicle's tire pressure monitoring system illuminates a steady warning light, taking immediate and systematic steps to inspect tire...How much does tire pressure drop in cold weatherWhen winter temperatures arrive, air contraction inside your vehicle tires can trigger unexpected tire pressure warning lights, so learning how to...